We are currently one of only a few retailers in Canada to carry Jerry's new hooks.
From Aqua Flies and Jerry French:
We designed our AquaTalon hooks after many years of on-the-water experience. An obvious need emerged for an ultra precise, high performance hook that is as fish-friendly as possible.
Aqua Flies and Jerry French have collaborated to produce the very best swing hook on the market. AquaTalon Swing Hooks are designed for optimal fish hooking and landing.
Currently available in sizes 1, 2, 4 and 6. Packaged in 25 and 100 packs.
• Continuous, round shape for superior strength
• Slight drop point for an ideal hook-up location
• Fine wire size for maximum penetration
• 20° turned up eye for a perfect girth hitch to trailing loop
• Offset point
• Micro barb for those that need one
• Made in Japan
The ultimate trailer hook
Aqua Flies Ultra Tubing
2 in stock
Ultra Tubing is the ideal tubing to use when building an Ultra Rig system or rigging an intruder the old school method.The Ultra Tubing fits perfectly onto an Aqua Flies shank and fits firmly over the eye of a hook.This style of rigging allows the hook to be placed in the optimal position behind the fly.Ultra Tubing remains flexible in all weather conditions, even below freezing.
It is easy to rig a fly that is tied on a shank with no trailing loop.First thread your tippet through the eye of the fly.Run the tippet over the top or the bottom fly, comb the materials around the tippet so the tippet is not smashing the fly.Take a short piece of Ultra Tubing and thread the tippet through the tube.Fit the tube onto the end of the shank, tie on your hook to the tippet and pull the tippet until the eye of the hook is in the tubing. At this point you can twist the hook into the position you prefer.
6 in stock
These plastic tubes are formulated to work well in all water and weather conditions, and to stand up to any pattern. Economical and performance rolled up in one great tube. The Large and Small Rigid Tubes also include a hook holder tube, all you have to do is add imagination!
Rigid Tubes are designed for high hoop strength so they are great for deer hair patterns and other patterns that use bulky materials that require heavy tying pressure. The tube material is good for all but the coldest water.
Available in Lg (1/8") and Small (3/32") diameters.
Small Rigid Tubes are also available with a thicker wall (TW), for greater strength and better performance in cold conditions. TW tubes are 3/32 inch OD x 5" long, 10 pk. Requires .031" Pin.
HMH Cut-T-Length Flexible Micro Tubing
Flies can be tied directly onto this tiny tubing, or it can be used to line any other tube that fits a 1/16" mandrel. To use a s a liner, first tie your tube fly. Then take a length of Micro Tubing and heat one end with a flame so that it swells to nearly twice the diameter. Then insert the micro tubing from the rear end of the fly and out through the front. Trim the Micro Tubing about 1/16' longer than the fly and flame the end so that it swells and won't come out.
Partridge of Redditch Nordic Tube Single Hooks, NTS/MM3ST
1 in stock
Modified Sproat bend, wide gape, x-strong hook, ideal for salmon, sea trout and steelhead tube patterns.